SX011814 Crossed Roller Bearing
Use the documented base-model evidence below to prepare a SX011814 request. Send the full suffix, drawing, mounting and application conditions so TFL Bearings can review the requested configuration before quotation.
SX011814 Model Evidence
Schaeffler SX-series product data establishes a base-model evidence boundary. Suffix-controlled details remain RFQ confirmation items.
Catalogue identity
The official SX-series entry identifies the base model SX011814 in dimension series 18.
Basic envelope
70 mm bore × 90 mm outside diameter × 10 mm width
Ring and mounting review
split outer ring, unsealed base-model structure
Published evidence boundary
No load-rating value is inferred on this page; validate duty from the current official data and the application load case.
Configuration and Application Checklist
A base model does not prove the supplied suffix, seal, precision, clearance, preload, fit, availability, or delivery condition.
Confirm the full designation
Confirm the complete designation and any VSP preload or RL0 clearance option, plus accuracy, lubrication, and supplied condition, in the RFQ.
Check the mating structure
Confirm shaft, housing, seating faces, clamping sequence, mounting distortion limits, and surrounding clearances from the current drawing.
Define operating conditions
State radial, axial and moment loads, speed or oscillation profile, stiffness and runout targets, mounting tolerances, lubrication, temperature, contamination, and duty cycle.
Prepare the purchasing scope
State quantity, destination, target timing, inspection plan, certificate needs, packaging, and shipment context for RFQ review.
TFL Supply Chain Review Support
TFL Bearings acts as a bearing supply chain integrator, so model review can also cover sourcing route, cost-saving alternatives, inspection, documents, and export coordination after RFQ evidence is validated.
Pre-audited manufacturing resources
TFL Bearings can coordinate cross roller bearing options across reviewed China manufacturing resources when the RFQ includes model, drawing, quantity, and application evidence.
Cost-saving candidate review
For replacement or cross-reference work, TFL Bearings can review dimensional interchangeability, preload, accuracy, rigidity, mounting, and application limits before quotation.
BOM and shipment coordination
Mixed-model requests can be reviewed for one PO, combined shipment, inspection, export packaging, and document support when the order scope is clear.
Evidence and Risk Boundary
The request moves forward only after the catalogue facts and configuration-dependent details are kept separate.
What to Send for SX011814
A complete technical and commercial package reduces follow-up and prevents a base-model assumption from becoming a configuration claim.
SX011814 Selection Decision Layer
Review identity, geometry, configuration, application duty, and purchasing scope together before a quotation decision.
Complete base code, suffix, marking, and source drawing
Separates an exact request from a family-level or replacement review.
Envelope, ring structure, seating faces, and mounting interface
Prevents a nominal size match from being treated as confirmed fit.
Loads, speed, motion, stiffness, accuracy, lubrication, and environment
Can change configuration, inspection, and application feasibility.
Quantity, destination, timing, documents, packaging, and inspection
Defines what can be reviewed during quotation follow-up.
Configuration Review Before Quotation
Use the applicable route for an exact code, a partial code, or a drawing-led request.
Model-to-RFQ Review Process
Catalogue evidence is checked first; configuration and commercial statements follow only after the request is complete.
Evidence intake
Check the SX011814 code, suffix, source drawing, dimensions, photos, and unresolved assumptions.
Engineering review
Review mounting, loads, speed, accuracy, stiffness, preload or clearance, lubrication, and environment.
Quotation route
Confirm the candidate configuration, quantity, destination, inspection, documents, packaging, price, and timing through RFQ follow-up.
SX011814 RFQ Checklist
Send these items together so technical review and quotation scope remain traceable.
Request SX011814 Review- Complete SX011814 code, suffix, marking photo, drawing reference, or previous purchase line.
- Bore, outside diameter, width, ring structure, mounting interface, and adjacent-part dimensions.
- Drawing, installation photo, measured sketch, or sample photos from both sides.
- Radial, axial, and moment load; speed; duty cycle; rigidity; accuracy; lubrication; and environment.
- Required seal, accuracy, clearance, preload, running torque, and inspection conditions.
- Quantity, destination, target timing, document needs, packaging notes, and unresolved fit questions.
Related Selection and RFQ Paths
Use these review paths to connect provided evidence with the next sourcing, application, replacement, or RFQ action.
Cross Roller Bearings
Use the general product center as the parent selection route.
Review optionCross roller bearing size chart
Use measured dimensions as supporting evidence, not as a stand-alone equivalence decision.
Review optionRequest a quote
Send SX011814 evidence, application conditions, quantity, and timing.
Review optionFAQ
70 mm bore × 90 mm outside diameter × 10 mm width. These values identify the documented base model; verify the full designation and current drawing before purchasing.
split outer ring, unsealed base-model structure. The mounting interface and supplied configuration still require project review.
No. Confirm the complete designation and any VSP preload or RL0 clearance option, plus accuracy, lubrication, and supplied condition, in the RFQ.
No. Those points are reviewed only after the exact designation, application, quantity, destination, inspection, and document scope are validated.
Send the complete code and suffix, dimensions, drawing or photos, mounting details, loads, speed, accuracy and rigidity needs, lubrication, environment, quantity, destination, and target timing.